qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (866B)

      1 # Clunker
      2 
      3 ![clunker](https://i.imgur.com/6X5ijDoh.jpg)
      4 
      5 The Clunker is a 40% DIY kit with a knob and solenoid.
      6 
      7 * Keyboard Maintainer: [Kyle McCreery](https://github.com/kylemccreery)
      8 * Hardware Supported: Clunker v1.3
      9 * Hardware Availability: [Clunker on MechWild](https://mechwild.com/product/clunker/)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make mechwild/clunker:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make mechwild/clunker:default:flash
     18 
     19 ## Bootloader
     20 
     21 Enter the bootloader in 3 ways:
     22 
     23 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     24 * **Physical reset button**: Briefly press the button on the top of the PCB - some may have pads you must short instead
     25 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available