qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1292B)

      1 # PuckBuddy
      2 
      3 ![PuckBuddy](https://i.imgur.com/iSVAHJzh.png)
      4 
      5 A macropad with a Cirque Glidepoint Trackpad in the middle, powered by the STM32 Blackpill.
      6 
      7 * Keyboard Maintainer: [Kyle McCreery](https://github.com/kylemccreery)
      8 * Hardware Supported: PuckBuddy v1.0
      9 * Hardware Availability: [PuckBuddy on MechWild](https://mechwild.com/product/puckbuddy/)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make mechwild/puckbuddy:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make mechwild/puckbuddy:default:flash
     18 
     19 ## Bootloader
     20 
     21 Enter the bootloader in 3 ways:
     22 
     23 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (assigned to the top left key) and plug in the keyboard while holding it.
     24 * **Physical reset button**: Press and hold the boot0 button on the blackpill, tap  and release the nrst button on the blackpill, then release the boot0 button.
     25 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. By default this is the top right key on layer 1.
     26 
     27 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).