qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1347B)

      1 # mechwild/sugarglider
      2 
      3 ![mechwild/sugarglider](https://i.imgur.com/IYhOU3xh.jpg)
      4 
      5 The Sugar Glider is an ergonomic keyboard with columnar stagger and a central touchpad, OLED, and status LEDs.
      6 
      7 * Keyboard Maintainer: [Kyle McCreery](https://github.com/kylemccreery)
      8 * Hardware Supported: Sugar Glider v0.2
      9 * Hardware Availability: [Sugar Glider on MechWild](https://mechwild.com/product/sugar-glider/)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make mechwild/sugarglider:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make mechwild/sugarglider:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (assigned to the top left key) and plug in the keyboard while holding it.
     26 * **Physical reset button**: Press and hold the boot0 button on the blackpill, tap  and release the nrst button on the blackpill, then release the boot0 button.
     27 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. By default this is the top right key on layer 1.