qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1054B)

      1 # Rena - PCB
      2 
      3 ![Rena](https://i.imgur.com/95rqwegh.jpg)
      4 
      5 A 59 keys keyboard with rgb.
      6 This keyboard use 8mhz HSE and STM32F103 as MCU.
      7 
      8 * Keyboard Maintainer: https://github.com/LXF-YZP
      9 * Hardware Supported: Rena PCB
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12     
     13     make meetlab/rena:default
     14     
     15 Flashing example for this keyboard:
     16 
     17     make meetlab/rena:default:flash
     18     
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     26 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     27 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available