qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1105B)

      1 # MelGeek Mach80
      2 
      3 ![Mach80](https://www.melgeek.com/collections/pcb-plate/products/melgeek-mach80-tkl87-hotswappable-rgb-pcba)
      4 
      5 A hotswap 80% RGB Custom Mechanical keyboard.
      6 
      7 * Keyboard Maintainer: [melgeek001365](https://github.com/melgeek001365)
      8 * Hardware Supported: Mach80 rev1 20210819 
      9 * Hardware Availability: [MelGeek](https://www.melgeek.com/)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make melgeek/mach80/rev1:default
     14     
     15 Enter the bootloader in 3 ways:  
     16 
     17 **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * 
     18 **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead * 
     19 **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available *
     20 
     21 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).