qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1344B)

      1 # MIIIW BlackIO83
      2 
      3 ![BlackIO83](https://i.imgur.com/jZ7HrTCh.jpg)
      4 ![BlackIO83](https://i.imgur.com/AnlUIfph.jpg)
      5 
      6 A customizable 75% keyboard.
      7 
      8 * Keyboard Maintainer: [ArthurCyy](https://github.com/ArthurCyy)
      9 * Hardware Supported: BlackIO83 rev_0100
     10 * Hardware Availability: [MIIIW](https://www.miiiw.com/)
     11 
     12 Make example for this keyboard (after setting up your build environment):
     13 
     14     make miiiw/blackio83/rev_0100:default
     15 
     16 Flashing example for this keyboard:
     17 
     18     make miiiw/blackio83/rev_0100:default:flash
     19 
     20 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     21 
     22 ## Bootloader
     23 
     24 Enter the bootloader in 3 ways:
     25 
     26 * **Bootmagic reset**: With the power switch off, hold down the key at (0,0) in the matrix (Escape) and plug in the keyboard.
     27 * **Physical button**: With the power switch off, hold the small metal button on the right side under the spacebar keycap and plug in the keyboard.
     28 * **Keycode in layout**:
     29   * (Official firmware only) With the power switch on, press and hold the left Shift+ Fn+ upper right DEL.
     30   * (Unofficial firmware) With the power switch on, press the key mapped to `QK_BOOT` if it is available.