readme.md (1503B)
1 # Bartlesplitt 2 3  4 5 Bartlesplit is based on [Cheapino](https://github.com/tompi/cheapino) by Tompi. 6 The original idea was to build a Cheapino with hot swaps, but it evolved into something more! 7 8 At the same time I was working on Bartlesplit, a friend of mine suggested that we try to make a splithub, letting us avoid having the Pro Micro directly on the board. 9 This is mostly a design choice, making each split less clutered. 10 We have called the hub [The Japanese Connection](https://github.com/Kyrremann/the-japanese-connection) since it's relying on the Japanese duplex matrix. 11 12 One of the main feature of the board is the built-in tenting, so you don't need to make a case to get simple tenting. 13 14 15 * Keyboard Maintainer: [Kyrre Havik](https://github.com/Kyrremann) 16 * Hardware Supported: Rev 1, Pro Micro 17 * Hardware Availability: https://github.com/Kyrremann/bartlesplit 18 19 Make example for this keyboard (after setting up your build environment): 20 21 make minimon/bartlesplit:default 22 23 Flashing example for this keyboard: 24 25 make minimon/bartlesplit:default:flash 26 27 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 28 29 ## Bootloader 30 31 Enter the bootloader in shorting the reset pin on Pro Micro on the hub.