qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1226B)

      1 # Mode M256-WS PCB QMK Firmware
      2 
      3 ![m256wh](https://imgur.com/97KRZCrh.jpg)
      4 
      5 The M256-WS is the hotswap version PCB support for the Mode Envoy.
      6 
      7 * Keyboard Maintainer: [Gondolindrim](https://github.com/Gondolindrim)
      8 * Hardware Supported: proprietary PCBs using the STM32F401 microcontroller
      9 * Hardware Availability: as of april 18, these PCBs are on the verge of being sold with the first kits of the Mode Envoy.
     10 
     11 ## How to flash
     12 
     13 In order to flash this PCB, first build the default layout (after setting up your build environment):
     14 
     15     make mode/m256ws:default
     16 
     17 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     18 
     19 ## Bootloader
     20 
     21 Enter the bootloader in 3 ways:
     22 
     23 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     24 * **Physical reset button**: press the button on the back of the PCB for at least five seconds
     25 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (escape key, layer 1 of the default keymap)