readme.md (1798B)
1 # Mode Eighty V1 PCB QMK firmware 2 3 \ 4 [Image Gallery](https://imgur.com/t/mechanicalkeyboards/8Uf6c2m?nc=1) 5 6 The Mode80 is a tenkeyless high-end keyboard sold by [Mode Designs](https://shop.modedesigns.com/). 7 8 * Keyboard Maintainer: [Gondolindrim](https://github.com/gondolindrim) 9 * Hardware Supported: proprietary PCB using STM32F072 controller 10 * Hardware Availability: the Mode Eighty V1 was discontinued in 2021 in favour of its second revisions. You can still buy hardware (PCBs and plates) at the Mode Designs website. 11 12 ## How to flash 13 14 ### Enter bootloader 15 16 The DFU state in the bootloader can be accessed in 3 ways: 17 18 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 19 * **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds 20 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout) 21 22 ## Compile firmware 23 24 After accessing the DFU state in your PCB, build the default layout using: 25 26 make mode/m80v1/m80h:default # Hotswap 27 make mode/m80v1/m80s:default # Soldered 28 29 Then download the resulting binary `*bin` file using `dfu-util` or QMK Toolbox. 30 31 ## Compile and flash 32 33 After accessing the DFU state in your PCB, you can compile-and-flash automatically usind `dfu-util` through 34 35 make mode/m80v1/m80h:default:flash # Hotswap 36 make mode/m80v1/m80s:default:flash # Soldered 37 38 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).