qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1792B)

      1 # Mode Eighty V2 PCB QMK firmware
      2 
      3 ![MODE80](https://i.imgur.com/26uzM3yl.jpg)\
      4 [Image Gallery](https://imgur.com/t/mechanicalkeyboards/8Uf6c2m?nc=1)
      5 
      6 The Mode80 is a tenkeyless high-end keyboard sold by [Mode Designs](https://shop.modedesigns.com/).
      7 
      8 * Keyboard Maintainer: [Gondolindrim](https://github.com/gondolindrim)
      9 * Hardware Supported: proprietary PCB using STM32F072 controller
     10 * Hardware Availability: you can get a Mode Eighty as of today (dec. 2021) through the in stock sales or special groupbuy editions at https://shop.modedesigns.com/
     11 
     12 ## How to flash
     13 
     14 ### Enter bootloader
     15 
     16 The DFU state in the bootloader can be accessed in 3 ways:
     17 
     18 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     19 * **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds
     20 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout)
     21 
     22 ## Compile firmware
     23 
     24 After accessing the DFU state in your PCB, build the default layout using:
     25 
     26     make mode/m80v2/m80v2h:default # Hotswap
     27     make mode/m80v2/m80v2s:default # Soldered
     28 
     29 Then download the resulting binary `*bin` file using `dfu-util` or QMK Toolbox.
     30 
     31 ## Compile and flash
     32 
     33 After accessing the DFU state in your PCB, you can compile-and-flash automatically usind `dfu-util` through
     34 
     35     make mode/m80v2/m80v2h:default:flash # Hotswap
     36     make mode/m80v2/m80v2s:default:flash # Soldered
     37 
     38 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).