qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1203B)

      1 # Moondrop Dash75
      2 
      3 ![Moondrop Dash75](https://i.imgur.com/mxaYcvqh.jpg)
      4 
      5 The 75%, Commodore 64 inspired, keyboard with integrated USB Hub and headphone DAC/Amp
      6 
      7 * Keyboard Maintainer: [vinorodrigues](https://github.com/vinorodrigues)
      8 * Hardware Supported:
      9     * Moondrop Dash75
     10 * Hardware Availability: [moondroplab.com](https://moondroplab.com/en/products/dash75)
     11 
     12 Make example for this keyboard (after setting up your build environment):
     13 
     14     make moondrop/dash75/r1:default
     15 
     16 Flashing example for this keyboard:
     17 
     18     make moondrop/dash75/r1:default:flash
     19 
     20 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
     21 Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     22 
     23 ## Bootloader
     24 
     25 Enter the bootloader in 3 ways:
     26 
     27 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     28 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     29 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available