qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1196B)

      1 # ms_sculpt
      2 
      3 ![ms_sculpt_with_cold_dry_joints](https://user-images.githubusercontent.com/105235786/168012266-4e235bf5-8d34-4731-ab17-2308a9d9a29e.jpg)
      4 
      5 MS Sculpt Keyboard ISO-layout wired to STM32F401 / blackpill
      6 
      7 * Keyboard Maintainer: [Jean Bernard](https://github.com/jn-bernard)
      8 * Hardware Supported: MS Sculpt Keyboard ISO-layout, STM32F401
      9 * Hardware Availability: Ebay
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make ms_sculpt:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make ms_sculpt:default:flash
     18 
     19 ## Bootloader
     20 
     21 Enter the bootloader in 3 ways:
     22 
     23 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     24 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     25 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
     26 
     27 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).