qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1305B)

      1 # Viktus Styrka Atmel Edition
      2 
      3 The Viktus Styrka is a 65% + left macro block created in a collaboration of OneCreativeMind and BlindAssassin111 (Viktus owner).
      4 
      5 This is a custom Atmel ISO Hotswap PCB for the Viktus Styrka designed and maintained by NoPunIn10Did.
      6 
      7 * Firmware Maintainer: [nopunin10did](https://github.com/nopunin10did)
      8 * Hardware Supported: Styrka
      9 * Hardware Availability: <https://www.Viktus.Design>
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make nopunin10did/styrkatmel:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make nopunin10did/styrkatmel:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 Enter the bootloader in 3 ways:
     22 
     23 * **Bootmagic reset**: Hold down the key at the top left in the macro columns (default: F1) and plug in the keyboard.
     24 * **Physical reset button**: Briefly press the button on the back of the PCB.
     25 * **Keycode in layout**: Press the key mapped to `QK_BOOT`. For the default layout, hold down the rightmost 1.25u key on the bottom row, then tap the top-left key in the macro columns.