qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1138B)

      1 # null65ansi v1
      2 
      3 ![sp](https://i.imgur.com/zO7Jlwj.png)
      4 
      5 65% tray mount PCB with RGB per key.
      6 
      7 * Keyboard Maintainer: [Quark](https://github.com/quark-works)
      8 * Hardware Supported: PCB
      9 * Hardware Availability: https://nulldesignco.com/
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make nulldesignco/null65ansi/v1:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make nulldesignco/null65ansi/v1:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     26 * **Physical boot button**: Hold the button labeled as "BOOT" on the back of the board or short the two pads on the front while you connect the keyboard to your computer.
     27 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available