readme.md (1391B)
1 # Orthograph 2 3 Split ortho keyboard with RGB backlighting 4 5 * Keyboard Maintainer: [vladkvit](https://github.com/vladkvit) 6 * Hardware Supported: Two PCBs + thin Pro Micro compatible boards (Elite C has been extensively tested). Boards with castellated holes (Elite C style) are much easier to install. Maximum thickness is around 3-3.5mm, so a stock Pro Micro (4mm) will not work. 7 * Hardware Availability: https://github.com/vladkvit/orthograph_keyboard for PCB, https://cad.onshape.com/documents/4f736d64448134c948af475a/w/ccab05fd44a7db98ce27216a/e/49ebfb6b27080b9b45bea74a?renderMode=0&uiState=64dd45dbc62cae486db10048 and https://cad.onshape.com/documents/5ff52821d2cb196f3db3d1e8/w/04b7cb21b748da89c8df31e6/e/486b72e32db97b2dfdf00af8 for the hardware 8 9 Make example for this keyboard (after setting up your build environment): 10 11 qmk compile -kb orthograph -km default 12 13 Flashing example for this keyboard: 14 qmk flash -kb orthograph -km default 15 Then, flash EEPROM with handedness (left / right) on both sides. 16 17 The reset button is on the underside of each half of the keyboard. 18 19 ## Bootloader 20 21 Enter the bootloader in 3 ways: 22 23 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (Escape) and plug in the keyboard 24 * **Physical reset button**: Briefly press the button on the back of the PCB 25 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available