qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1311B)

      1 # pablojimenezmateo/classic48
      2 
      3 ![pablojimenezmateo/classic48](https://i.imgur.com/czFWWhX.jpeg)
      4 
      5 A custom split keyboard with 48 keys and addressable LEDs.
      6 
      7 * Keyboard Maintainer: [Pablo Jimenez Mateo](https://github.com/pablojimenezmateo)
      8 * Hardware Supported: RP2040 Pro Micro
      9 * Hardware Availability: https://github.com/pablojimenezmateo/classic48
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make pablojimenezmateo/classic48:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     qmk flash -kb pablojimenezmateo/classic48 -km default -bl uf2-split-left
     18     qmk flash -kb pablojimenezmateo/classic48 -km default -bl uf2-split-right
     19 
     20 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     21 
     22 ## Bootloader
     23 
     24 Enter the bootloader in 3 ways:
     25 
     26 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     27 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     28 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available