qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1473B)

      1 # Pila87 / XM87 Pro
      2 
      3 ![Pila87](https://i.imgur.com/rLLJemMh.jpg)
      4 
      5 A TKL keyboard made by 小淼外设 (Phage Studio), which controlled by an CKS32F103RBT6 (clone STM32F103RBT6) chipset. The keyboard features per-key RGB, 3 external RGB underglow ports.
      6 
      7 * Keyboard Maintainer: Phage Studio
      8 * Hardware Supported: CKS32F103RBT6 (clone STM32F103RBT6)
      9 * Hardware Availability: From 小淼外设 on Taobao
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make phage_studio/pila87:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make phage_studio/pila87:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Warning
     22 
     23 Before using this QMK firmware, you need these thing below:
     24 
     25 * 1 Quartz Crystal (SMD 3225) 8 Mhz
     26 * 2 Capacitor 0603 18pF (or 22pF)
     27 * 1 ST-Link v2 to connect SWD and flash STM32duino (Maple 003). If you don't know how to flash, please read this guide: [Click here](https://github.com/qmk/qmk_firmware/blob/master/docs/isp_flashing_guide.md#flashing-stm32duino-bootloader)
     28 
     29 ## Bootloader
     30 
     31 Enter the bootloader in 3 ways:
     32 
     33 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (B key) and plug in the keyboard
     34 * **Keycode in layout**: Press the key mapped to `RESET` if it is available