qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1334B)

      1 # Piantor UV 44
      2 
      3 ![Piantor UV 44](https://i.ibb.co/QvJM1GR/20240806-PIANTORUV44-00.png)
      4 
      5 PiantorUV44 is a Piantor/Cantor fork with Raspberry Pi Pico, hybrid hotswap socket and soldered-in switches support and flippable PCB.
      6 
      7 * Keyboard Maintainer: [azhizhinov](https://github.com/azhizhinov)
      8 * Hardware Supported: RP2040
      9 * Hardware Availability: https://github.com/azhizhinov/PIANTORUV44
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make piantoruv44:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make piantoruv44:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 2 ways:
     24 
     25 * **Physical reset button**: Hold the `BOOT` button on the Pico and press the `RST` button on the Pico, release the the `RST` button before the `BOOT` button.
     26 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
     27 Once you enter the bootloader, the keyboard will show up as a USB device on your computer, you could drag and drop a firmware file to flash it, but I recommend using the flash commands for the respective side.