qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1220B)

      1 # pica40
      2 
      3 ![pica40](https://i.imgur.com/CKImjAPh.jpg)
      4 
      5 A family of 40-key split ortholinear keyboards with rotary encoder.
      6 
      7 -   Keyboard Maintainer: [zzeneg](https://github.com/zzeneg)
      8 -   Hardware Supported: Pica40 PCBs, Pro Micro (rev1), XIAO RP2040/nRF52840 (rev2)
      9 -   Hardware Availability: [GitHub](https://github.com/zzeneg/pica40)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make pica40:default
     14     make pica40/rev1:default
     15 
     16 Flashing example for this keyboard:
     17 
     18     make pica40:default:flash
     19     make pica40/rev1:default:flash
     20 
     21 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     22 
     23 ## Bootloader
     24 
     25 Enter the bootloader in 3 ways:
     26 
     27 -   **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     28 -   **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     29 -   **Keycode in layout**: Press the key mapped to `RESET` if it is available