qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1174B)

      1 # Shadow80
      2 
      3 ![shadow80](https://imgur.com/XLjjdMzh.jpg)
      4 An 80%/TenKeyLess sized keyboard with 74 RGB.
      5 Before enabling the maximum brightness of RGB lights, please confirm whether the USB device power supply supports it.
      6 This PCB has two versions: hotswap and solder.
      7 
      8 * Keyboard Maintainer: [PixelSpace](https://github.com/PixelSpaceStudio)
      9 * Hardware Supported: shadow80
     10 * Hardware Availability: [PixelSpace](https://github.com/PixelSpaceStudio)
     11 
     12 Make example for this keyboard (after setting up your build environment):
     13 
     14     make shadow80:default
     15        
     16 Flashing example for this keyboard:
     17 
     18     make shadow80:default:flash
     19     
     20 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     21 
     22 ## Bootloader
     23 
     24 Enter the bootloader in 2 ways:
     25 
     26 - **Bootmagic reset**: Hold down the key at (0,0)(always "ESC") in the matrix (usually the top left key which is Escape in this keyboard) and plug in the keyboard
     27 - **Keycode in layout**: Press the key mapped to `QK_BOOT`