qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1159B)

      1 # Play Keyboard 64RGB
      2 
      3 ![PK64RGB](https://cdn.store-assets.com/s/409567/i/25281841.png)
      4 
      5 A 60% RGB hotswap keyboard PCB made by Play Keyboard.
      6 
      7 * Keyboard Maintainer: [Barry Huang](https://github.com/yj7272098)
      8 * Hardware Supported: Play Keyboard 64 RGB
      9 * Hardware Availability: [Play Keyboard](http://play-keyboard.store/)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make playkbtw/pk64rgb:default
     14 
     15 ## Bootloader
     16 
     17 Enter the bootloader in 3 ways:
     18 
     19 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     20 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     21 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
     22 
     23 You can get into bootloader by pressing the reset button from the back of PCB.
     24 
     25 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).