qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1223B)

      1 # S20
      2 
      3 ![S20](https://i.imgur.com/RvOACqR.jpg?1)
      4 
      5 The S20 keyboard is a FR4 sandwich keyboard which was orginally designed to add extra functionality to a user's current keyboard setup.
      6 
      7 * Keyboard Maintainer: [polycarbdiet](https://github.com/polycarbdiet)
      8 * Hardware Supported: S20 - FR4 sandwich MacroPad/NumberPad
      9 * Hardware Availability: Custom, limitied quantaties. 
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make polycarbdiet/s20:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make polycarbdiet/s20:default:flash
     18 
     19 **Reset Method:** 
     20 - Press the `RESET` button on the under side of the PCB  
     21 
     22 **Bootloader Method:** 
     23 - Hold down the key located at `K00`, commonly programmed as `ESC`, while plugging in the keyboard.
     24 - Hold down the key located at `K00`, commonly programmed as `ESC`, and press the QK_BOOT button on the PCB.
     25 - Hold down the key located at `K42` and then press the key located at `K40`.
     26 
     27 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).