qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1472B)

      1 # ai03 x PrimeKB Meridian
      2 
      3 ![Meridian](https://i.imgur.com/c90ZTJJl.jpg)
      4 
      5 * Keyboard Maintainer: [Holten Campbell](https://github.com/holtenc)
      6 * Hardware Supported: STM32F072CBT6
      7 
      8 ## Compiling firmware and flashing
      9 
     10 ### Enter bootloader
     11 
     12 The DFU state in the bootloader can be accessed in 3 ways:
     13 
     14 * **Bootmagic reset**: hold down the key at (0,0) in the matrix (usually Escape) and plug in the keyboard; or
     15 * **Physical reset button**: press the button on the bottom of the PCB; or
     16 * **Keycode in layout**: press the key mapped to `QK_BOOT` if it is available (Escape key on layer 1 in the default layout).
     17 
     18 ### Compile firmware
     19 
     20 The Meridian PCB was delivered in two variants, equal in design but using different RGB LED models: one using WS2812 and another using KTR1010 LEDs. Both can be compiled using
     21 
     22     make primekb/meridian/ws1812:default
     23     make primekb/meridian/ktr1010:default
     24 
     25 After compiling, enter bootloader in the PCB and flash the firmware using `dfu-util` or QMK Toolbox. For direct compile-and-flashing, put the PCB in DFU state and use
     26 
     27     make primekb/meridian/ws1812:default:flash
     28     make primekb/meridian/ktr1010:default:flash
     29 
     30 VIA-supported firmwares are also available.
     31 
     32 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).