qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1055B)

      1 # Printed Pad
      2 
      3 ![magtray4x3](https://i.imgur.com/TBpZzIoh.jpeg)
      4 
      5 * Keyboard Maintainer: [noahbei](https://github.com/noahbei)
      6 * Hardware Supported: STM32F072RBT6
      7 * Hardware Availability: https://protadesigns.com/products/printed-pad
      8 
      9 Make example for this keyboard (after setting up your build environment):
     10 
     11     make printedpad:default
     12 
     13 Flashing example for this keyboard:
     14 
     15     make printedpad:default:flash
     16 
     17 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     18 
     19 ## Bootloader
     20 
     21 Enter the bootloader in 3 ways:
     22 
     23 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     24 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     25 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available