qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1177B)

      1 # proteus67
      2 
      3 ![proteus67](https://i.imgur.com/mYhl7Jah.png)
      4 
      5 67 key ortholinear layout with rotary encoder.
      6 
      7 * Keyboard Maintainer: [James Gzowski](https://github.com/gzowski)
      8 * Hardware Supported: Elite-Pi or equivilent RP2040 controller with additional I/O along bottom.
      9 * Build Guide: [Proteus67](https://github.com/gzowski/Proteus67)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 	
     13     make proteus67:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make proteus67:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     24 * **Physical reset button**: Briefly press the button on the back of the PCB, if using a RP2040 press repeatidly to enter boot mode.
     25 * **Hold down boot loader button on MCU** Hold down the boot loader button on the MCU while plugging in the keyboard