qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1185B)

      1 # QVEX Lynepad 2
      2 
      3 ![QVEX Lynepad 2.1](https://i.imgur.com/eDvVaE4h.jpeg)
      4 
      5 *Macropad with 11 keys, thumbwheel, and a rotary 4-way switch*
      6 
      7 * Keyboard Maintainer: [QVEX Tech](https://github.com/QVEX-Tech) ([seflm](https://github.com/seflm))
      8 * Hardware Supported: QVEX Lynepad
      9 * Hardware Availability: [QVEX Lynepad on Tindie](https://www.tindie.com/products/qvex_tech/lynepad-21-hot-swap-macropad-w-joystick/)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make qvex/lynepad:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make qvex/lynepad:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ### Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down the top left key and plug in the keyboard
     26 * **Physical reset button**: Briefly press the reset button on the back of the Lynepad using SIM tool (rev.2.0 or newer) 
     27 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available