qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1248B)

      1 # 3x3macropad
      2 
      3 ![3x3macropad](https://i.imgur.com/LMkcKOw.jpg)
      4 
      5 The 3x3macropad is a small macropad with a cool OLED screen and rotary encoder.
      6 It was inspired by stacked FR4 keyboards like the Discipline65.
      7 
      8 * Keyboard Maintainer: [RarePotato8DE](https://github.com/rarepotato8de)
      9 * Hardware Supported: 3x3macropad
     10 * Hardware Availability: [Open source!](https://github.com/rarepotato8de/3x3macropad)
     11 
     12 Make example for this keyboard (after setting up your build environment):
     13 
     14     make rarepotato8de/3x3macropad:default
     15 
     16 Flashing example for this keyboard:
     17 
     18     make rarepotato8de/3x3macropad:default:flash
     19 
     20 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     21 
     22 ## Bootloader
     23 
     24 Enter the bootloader in 3 ways:
     25 
     26 * **Bootmagic reset**: Hold down the key at (0,1) in the matrix (the top left one below the OLED) and plug in the keyboard
     27 * **Physical reset button**: Short the two through hole pins on the back of the PCB (positioned at the rotary encoder)
     28 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available