qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1069B)

      1 # [RART 80 Hotswap]
      2 
      3 ![RART 80](https://i.imgur.com/QCeTuBeh.png)
      4 
      5 PCB layout TKL, based on IMKG (Indonesia Mechanical Keyboard Group)
      6 
      7 * Keyboard Maintainer: [Alabahuy](https://github.com/alabahuy)
      8 * Hardware Supported: RART80 PCB, Atmega32a, Type C
      9 * Hardware Availability: Private GB
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make rart/rart80:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make rart/rart80:default:flash
     18 
     19 ## Bootloader
     20 
     21 Enter the bootloader in 3 ways:
     22 
     23 * To Enter the bootloader you can short and hold boot pin, short reset pin, release reset and boot pin. 
     24 
     25 * Bootmagic reset, hold down the key at (0,0) in the matrix (ESC) and plug in the keyboard. 
     26 
     27 * Bootloader reset on the matrix, hold down key at (0,1) and plug in the keyboard
     28 
     29 
     30 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).