config.h (1044B)
1 // Copyright 2022 xerootg 2 // SPDX-License-Identifier: GPL-2.0-or-later 3 4 #pragma once 5 6 // //we are using hardware serial, so lets undef the softserial used otherwise 7 8 /* serial.c configuration for split keyboard */ 9 #define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode. 10 11 #define SERIAL_USART_RX_PIN B7 // USART RX pin 12 #define SERIAL_USART_TX_PIN B6 // USART TX pin 13 14 #define SERIAL_USART_PIN_SWAP // Swap TX and RX pins if keyboard is master halve. 15 // Check if this feature is necessary with your keyboard design and available on the mcu. 16 #define SERIAL_USART_DRIVER SD1 // USART driver of TX and RX pin. default: SD1 17 #define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 18 #define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 19 #define SERIAL_USART_TIMEOUT 20 // USART driver timeout. default 20