qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1244B)

      1 # Sol 3
      2 
      3 ![Sol 3](https://raw.githubusercontent.com/noroadsleft/qmk_images/master/keyboards/rgbkb/sol3/rev1/rgbkb_sol3_rev1_01.jpg)
      4 
      5 An extensible split keyboard with hotswap sockets and per-key RGB lighting.
      6 
      7 * Keyboard Maintainer: [XScorpion2](https://github.com/XScorpion2), [RGBKB](https://github.com/rgbkb)
      8 * Hardware Supported: RGBKB Sol 3 rev1 (STM32F303)
      9 * Hardware Availability: [RGBKB.net](https://www.rgbkb.net/collections/sol-3)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make rgbkb/sol3/rev1:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make rgbkb/sol3/rev1:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 To reset the board into bootloader mode, do one of the following:
     24 
     25 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (Adjust + R by default)
     26 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard (also erases persistent settings)