qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1262B)

      1 # Royal Kludge RK G68
      2 
      3 ![Royal Kludge RK G68](https://imgur.com/UnOJPZrh.jpg)
      4 
      5 * Keyboard Maintainer: [Thomaz Peres](https://github.com/Thomaz-Peres)
      6 * Hardware Supported: Royal Kludge RK G68, RGB version
      7 * Hardware Availability: [RKGaming.com](http://en.rkgaming.com/product/13/), [Amazon.com](https://www.amazon.com/RK-ROYAL-KLUDGE-Bluetooth-Mechanical/dp/B08JCRMZX9/)
      8 
      9 After setting up your build environment, you can compile the  default keymap by using:
     10 
     11     make rkg68:default
     12 
     13 Flashing example for this keyboard:
     14 
     15     make rkg68:default:flash
     16 
     17 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     18 
     19 ## Bootloader
     20 
     21 Enter the bootloader in 3 ways:
     22 
     23 - **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     24 - **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     25 - **Keycode in layout**: Press the key `FN` and `Left CTRL`.
     26 
     27 ## Layout
     28 
     29 - 65% Standard ANSI layout
     30 
     31 ![Imgur](https://i.imgur.com/l7ka1gkh.png)