qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1219B)

      1 # rm_fullsize
      2 
      3 ![rm_full](https://i.imgur.com/k61zEtah.jpg)
      4 
      5 A fullsized keyboard with multiple layout options and a big knob.  The case is manchined out of 6061 Aluminum by Rucker Machine in the USA.
      6 
      7 * Keyboard Maintainer: [Rucker Machine](https://github.com/RuckerMachine)
      8 * Hardware Supported: RM Fullsized PCB, RP2040 controller
      9 * Hardware Availability: [RM Fullsized](https://www.rmkeebs.com/product/rm-fullsized/)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make rmkeebs/rm_fullsize:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make rmkeebs/rm_fullsize:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 2 ways:
     24 
     25 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (Escape key) and plug in the keyboard
     26 * **Physical reset button**: Hold down the button on the back of the PCB labeled BOOTLOADER, then press and hold the button labeled RESET for 3 seconds, then release both buttons.