qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1337B)

      1 # FistBNMP
      2 
      3 ![FistBNMP assembled proto and bare PCB](https://i.redd.it/uv34770qmc371.jpg)
      4 
      5 A compact 9u layout with support for standard Cherry MX and Low Profile MX switches.
      6 
      7 * Keyboard Maintainer: [rpiguy9907](https://github.com/rpiguy9907), [lesshonor](https://github.com/lesshonor)
      8 * Hardware Supported: FistBNMP PCB (atmega32u4, atmel-dfu)
      9 * Hardware Availability: Files available on request; ask in the 40% Discord
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make rpiguy9907/fistbnmp:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make rpiguy9907/fistbnmp:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down the top left key and plug in the keyboard. This will also clear EEPROM, so it is a good first step if the keyboard is misbehaving.
     26 * **Physical reset button**: Briefly press the button labeled `SW1` on the back of the PCB.
     27 * **Keycode in layout**: There is no key mapped to `QK_BOOT` in the pre-created keymaps, but you may assign this key in any keymaps you create.