qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1267B)

      1 # Starry FRL
      2 
      3 ![Starry FRL](https://i.imgur.com/eRYlEe7.jpeg)
      4 
      5  This firmware support for both Solder and Hotswap PCB of Starry FRL
      6 
      7  **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `uf2` appropriate for your board.
      8 
      9 * Keyboard Maintainer: [Mai The San](https://github.com/MaiTheSan) 
     10 * Hardware Supported: Starry FRL 
     11 * Hardware Availability: [Waifu.works Discord](https://discord.gg/waifuworks)
     12 
     13 Make examples for this keyboard (after setting up your build environment):
     14 
     15     make salane/starryfrl:default
     16 
     17 Flashing example for this keyboard:
     18 
     19     make salane/starryfrl:default:flash
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     26 * **Physical reset button**: Press the key `BOOT` in the back of PCB and plug in keyboard
     27 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
     28 
     29 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).