readme.md (1287B)
1 # Amber80 solder 2 3 A TKL keyboard sold in several variants. 4 5 1. [Solder](solder/): 1/2022. Atmega32u4 soldered keyboard. Sold under the name "Amber80" with Amber80 keyboard case. Compatible with Amber80 keyboard case. 6 7 **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board. 8 9 * Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan) 10 * Hardware Supported: Amber80 11 * Hardware Availability: Comming Soon 12 13 Make examples for this keyboard (after setting up your build environment): 14 15 make sawnsprojects/amber80/solder:default 16 17 ## Bootloader 18 19 Enter the bootloader in 3 ways: 20 21 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 22 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead 23 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available 24 25 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).