qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1177B)

      1 # Krush65 Hotswap
      2 
      3 ![Krush65](https://imgur.com/56ZvWUmh.jpg)
      4 
      5 A 65% keyboard PCB made and sold by SawnsProjects with Nuxros in [mechkey.store](https://mechkey.store/blogs/store-updates/introducing-krush-65). 
      6 
      7 * Keyboard Maintainer: [Mai The San](https://github.com/MaiTheSan)
      8 * Hardware Supported: Krush65
      9 * Hardware Availability: [mechkey.store](https://mechkey.store/products/krush-65-hotswap-pcb)
     10 
     11 ## Bootloader
     12 
     13 Enter the bootloader in 3 ways:
     14 
     15 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     16 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     17 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
     18 
     19 Make example for this keyboard (after setting up your build environment):
     20 
     21     make sawnsprojects/krush/krush65/hotswap:default
     22 
     23 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).