qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1490B)

      1 # Plaque80
      2 
      3 ![Plaque80](https://i.imgur.com/kgRcHTlh.png)
      4 
      5  A TKL keyboard sold in ParamountKeeb. Atmega32u4 soldered PCB. Sold under the name "Plaque80" with Plaque80 keyboard case. This PCB can compatible with Plaque80 keyboard case and several TKL boards like Geonworks Frog/F1-8x; KFE-CE; TGR Jane; Cloudline; Singa Jaguar; Amber80, among others.
      6 
      7  **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board.
      8 
      9 * Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan) [ParamountKeeb](https://paramountkeeb.com/)
     10 * Hardware Supported: Plaque80 
     11 * Hardware Availability: [ParamountKeeb](https://paramountkeeb.com/)
     12 
     13 Make examples for this keyboard (after setting up your build environment):
     14 
     15     make sawnsprojects/plaque80:default
     16 
     17 ## Bootloader
     18 
     19 Enter the bootloader in 3 ways:
     20 
     21 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     22 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     23 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
     24 
     25 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).