qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1054B)

      1 # kk980
      2 
      3 ![kk980](https://i.imgur.com/NDsBMR6.jpg)
      4 
      5 A hotswap 98% RGB Mechanical keyboard.
      6 
      7 * Keyboard Maintainer: [sets3n](https://github.com/sets3n)
      8 * Hardware Supported: kk980 PCB
      9 * Hardware Availability: -
     10 
     11 ## Bootloader
     12 
     13 Enter the bootloader in 3 ways:
     14 
     15 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     16 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     17 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
     18 
     19 ## HEX
     20 
     21 Make example for this keyboard (after setting up your build environment):
     22 
     23     make sets3n/kk980:default
     24 
     25 ## FLASH
     26 
     27 Flashing example for this keyboard:
     28 
     29     make sets3n/kk980:default:flash
     30 
     31 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).