qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1127B)

      1 # Sha
      2 
      3 ![Sha](https://i.imgur.com/4yuQwRXh.jpg)
      4 
      5 Sha is a 50 key ortholinear keyboard, powered by a Waveshare RP2040-Zero or Waveshare RP2040-Matrix.
      6 
      7 * Keyboard Maintainer: [Steven Karrmann](https://github.com/skarrmann)
      8 * Hardware Supported: Sha PCBs with either RP2040-Zero or RP2040-Matrix
      9 * Hardware Availability: [Sha GitHub repository](https://github.com/skarrmann/sha)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make sha:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make sha:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key) and plug in the keyboard.
     26 * **Physical reset button**: Doublet-tap the EN/RESET button on the MCU board.
     27 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available.