qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1197B)

      1 # mino_plus
      2 
      3 ![mino_plus](https://i.imgur.com/vZJ6kaNh.jpg)
      4 
      5 A 65% keyboard, inspried by tetrominos.
      6 
      7 * Keyboard Maintainer: [ShandonCodes](https://github.com/ShandonCodes)
      8 * Hardware Supported: Mino Plus PCB
      9 * Hardware Availability: https://store.shandon.codes/mino-plus/
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make shandoncodes/mino_plus/soldered:default
     14     make shandoncodes/mino_plus/hotswap:default
     15 
     16 Flashing example for this keyboard:
     17 
     18     make shandoncodes/mino_plus/soldered:default:flash
     19     make shandoncodes/mino_plus/hotswap:default:flash
     20 
     21 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     22 
     23 ## Bootloader
     24 
     25 Enter the bootloader in 3 ways:
     26 
     27 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     28 * **Physical reset button**: Briefly press the button on the back of the PCB
     29 * **Keycode in layout**: Press the key mapped to `FN` + `R` if it is available.