readme.md (1080B)
1 # FJLabs Rooboard65 2 3 The following is the QMK Firmware for the FJLabs Rooboard65 PCB, a universal tray mount 65% hotswap PCB with per key RGB LED's. 4 5 The PCB will feature: 6 * Kailh Hotswap sockets 7 * QMK & VIA compatibility 8 * Per-Key RGB LED's 9 10 --- 11 12 * Keyboard Maintainer: FJLabs 13 * Hardware Supported: Rooboard65 14 15 Make example for this keyboard (after setting up your build environment): 16 17 make skippys_custom_pcs/rooboard65:default 18 19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 20 21 ## Bootloader 22 23 Enter the bootloader in 3 ways: 24 25 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 26 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead 27 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available