qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1192B)

      1 # qk21_V1
      2 
      3 ![qk21](https://i.imgur.com/d65CJC5h.jpg)
      4 
      5 The following is the QMK Firmware for the number pad 6x4 keylayout - designed in Dongguan Jizhi Electronic Technology Co., Ltd
      6 
      7 * Keyboard Maintainer: [linlin012](https://github.com/linlin012)
      8 * Hardware Supported: JK172-RGB(4028)-U PCBs, MEGA32U4-MU 
      9 * Hardware Availability: http://www.skyloong.com.cn
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make skyloong/qk21/v1:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make skyloong/qk21/v1:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     26 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     27 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available