config.h (3486B)
1 /* 2 Copyright 2020 Yiancar 3 4 This program is free software: you can redistribute it and/or modify 5 it under the terms of the GNU General Public License as published by 6 the Free Software Foundation, either version 2 of the License, or 7 (at your option) any later version. 8 9 This program is distributed in the hope that it will be useful, 10 but WITHOUT ANY WARRANTY; without even the implied warranty of 11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 12 GNU General Public License for more details. 13 14 You should have received a copy of the GNU General Public License 15 along with this program. If not, see <http://www.gnu.org/licenses/>. 16 */ 17 18 #pragma once 19 20 21 /* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */ 22 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE 23 24 /* LSE clock */ 25 #define STM32_LSECLK 32768 26 27 /* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */ 28 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE 29 30 /* Setting up 400KHz I2C Clock for a 48MHz system clock */ 31 #define I2C1_SCL_PAL_MODE 1 32 #define I2C1_SDA_PAL_MODE 1 33 #define I2C1_TIMINGR_SCLDEL 3U 34 #define I2C1_TIMINGR_SDADEL 1U 35 #define I2C1_TIMINGR_SCLH 3U 36 #define I2C1_TIMINGR_SCLL 9U 37 38 #define WS2812_SPI_DRIVER SPID2 // default: SPID1 39 #define WS2812_SPI_MOSI_PAL_MODE 0 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5 40 #define WS2812_SPI_SCK_PAL_MODE 0 41 #define WS2812_SPI_SCK_PIN B13 42 43 /* Backlight options */ 44 45 #define RGB_BACKLIGHT_ENABLED 1 46 47 #define RGB_BACKLIGHT_NEBULA12 48 49 // they aren't really used if RGB_BACKLIGHT_NEBULA65 defined 50 #define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0 51 #define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 52 #define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0 53 #define RGB_BACKLIGHT_USE_7U_SPACEBAR 0 54 #define RGB_BACKLIGHT_USE_ISO_ENTER 0 55 #define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0 56 57 // disable backlight when USB suspended (PC sleep/hibernate/shutdown) 58 #define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0 59 60 // disable backlight after timeout in minutes, 0 = no timeout 61 #define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 62 63 // the default brightness 64 #define RGB_BACKLIGHT_BRIGHTNESS 255 65 66 // the default effect (RGB test) 67 #define RGB_BACKLIGHT_EFFECT 6 68 69 // the default effect speed (0-3) 70 #define RGB_BACKLIGHT_EFFECT_SPEED 0 71 72 // the default color1 and color2 73 #define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } 74 #define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 } 75 76 #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND 77 #define IS31FL3731_LED_COUNT 16 78 79 // These define which keys in the matrix are alphas/mods 80 // Used for backlight effects so colors are different for 81 // alphas vs. mods 82 // Each value is for a row, bit 0 is column 0 83 // Alpha=0 Mod=1 84 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000000 85 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0000000000000000 86 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0000000000000000 87 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0000000000000000 88 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0000000000000000 89 90 #define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } 91 #define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } 92 #define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } 93 #define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } 94 95 // Backlight config starts after VIA's EEPROM usage, 96 // dynamic keymaps start after this. 97 #define VIA_EEPROM_CUSTOM_CONFIG_SIZE 32