config.h (3305B)
1 /* 2 Copyright 2020 Yiancar 3 4 This program is free software: you can redistribute it and/or modify 5 it under the terms of the GNU General Public License as published by 6 the Free Software Foundation, either version 2 of the License, or 7 (at your option) any later version. 8 9 This program is distributed in the hope that it will be useful, 10 but WITHOUT ANY WARRANTY; without even the implied warranty of 11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 12 GNU General Public License for more details. 13 14 You should have received a copy of the GNU General Public License 15 along with this program. If not, see <http://www.gnu.org/licenses/>. 16 */ 17 18 #pragma once 19 20 #define WS2812_PWM_DRIVER PWMD3 // default: PWMD2 21 #define WS2812_PWM_CHANNEL 2 // default: 2 22 #define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 23 #define WS2812_PWM_DMA_STREAM STM32_DMA1_STREAM3 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. 24 #define WS2812_PWM_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. 25 26 /* Backlight options */ 27 28 #define RGB_BACKLIGHT_ENABLED 1 29 30 #define RGB_BACKLIGHT_NEBULA68 31 32 // they aren't really used if RGB_BACKLIGHT_NEBULA65 defined 33 #define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0 34 #define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 35 #define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0 36 #define RGB_BACKLIGHT_USE_7U_SPACEBAR 0 37 #define RGB_BACKLIGHT_USE_ISO_ENTER 0 38 #define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0 39 40 // disable backlight when USB suspended (PC sleep/hibernate/shutdown) 41 #define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0 42 43 // disable backlight after timeout in minutes, 0 = no timeout 44 #define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 45 46 // the default brightness 47 #define RGB_BACKLIGHT_BRIGHTNESS 255 48 49 // the default effect (RGB test) 50 #define RGB_BACKLIGHT_EFFECT 6 51 52 // the default effect speed (0-3) 53 #define RGB_BACKLIGHT_EFFECT_SPEED 0 54 55 // the default color1 and color2 56 #define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } 57 #define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 } 58 59 #define IS31FL3733_I2C_ADDRESS_1 IS31FL3733_I2C_ADDRESS_GND_GND 60 #define IS31FL3733_I2C_ADDRESS_2 IS31FL3733_I2C_ADDRESS_GND_SDA 61 #define IS31FL3733_LED_COUNT 128 62 63 // These define which keys in the matrix are alphas/mods 64 // Used for backlight effects so colors are different for 65 // alphas vs. mods 66 // Each value is for a row, bit 0 is column 0 67 // Alpha=0 Mod=1 68 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0110000000000001 69 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0100000000000001 70 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0110000000000001 71 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0111000000000001 72 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0111111000000111 73 74 #define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } 75 #define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } 76 #define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } 77 #define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } 78 79 // Backlight config starts after VIA's EEPROM usage, 80 // dynamic keymaps start after this. 81 #define VIA_EEPROM_CUSTOM_CONFIG_SIZE 32