qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (765B)

      1 # Aurora Sweep's Debug Keymap
      2 
      3 Due to the complex layer setup, the default keymap for the Aurora Sweep is relatively hard to debug.
      4 This debug keymap should make that a lot easier.
      5 
      6 ## Keys
      7 
      8 ![Keys](https://raw.githubusercontent.com/splitkb/qmk_firmware/assets/aurora/sweep/keymaps/debug/keys.png)
      9 
     10 The left side uses lowercase letters, the right side uses uppercase ones.
     11 
     12 ## Encoders
     13 
     14 Encoders output a number of 0 to 3, depending on the installed position.
     15 These correspond to the index used for custom encoder code.
     16 
     17 The number is followed by either a `+` or a `-`, depending on the direction turned.
     18 
     19 ## LEDs
     20 
     21 Both underglow and per-key RGB should be fading between red and off.
     22 
     23 ## OLEDs
     24 
     25 Both the primary and secondary side should be filled with characters.