qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1117B)


      1 # banime40 
      2 
      3 ![](https://i.imgur.com/sHQyMfEh.jpeg)
      4 
      5 A hotswap gasket mount 4x10 that can support multiple layouts.
      6 
      7 * Keyboard Maintainer: [sporewoh](https://github.com/ChrisChrisLoLo)
      8 * Hardware Supported: Open source PCB files, Pro Micro compatible
      9 * Hardware Availability: PCBs and Case files available [here](https://github.com/ChrisChrisLoLo/banime40)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make sporewoh/banime40:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make sporewoh/banime40:default:flash
     18 
     19 
     20 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     21 
     22 ## Bootloader
     23 
     24 Enter the bootloader in 2 ways:
     25 
     26 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     27 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead