qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1183B)

      1 # SteelSeries Prime +
      2 
      3 ![Prime+](https://i.imgur.com/QhNHmwxh.png)
      4 
      5 This firmware does not support the dedicated lift off sensor.
      6 
      7 Erase with an stlink and flash this [uf2boot bootloader](https://github.com/daskygit/uf2-prime-plus), this is a a one way procedure voiding any warranty so be sure you don't want to use the original manufacturers firmware.
      8 
      9 * Keyboard Maintainer: [Dasky](https://github.com/daskygit)
     10 * Hardware Supported: SteelSeries Prime+
     11 * Hardware Availability: https://steelseries.com/gaming-mice/prime-plus
     12 
     13 Make example for this keyboard (after setting up your build environment):
     14 
     15     make steelseries/prime_plus:default
     16 
     17 Flashing example for this keyboard:
     18 
     19     make steelseries/prime_plus:default:flash
     20 
     21 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     22 
     23 ## Bootloader
     24 
     25 Enter the bootloader in 2 ways:
     26 
     27 * **Bootmagic reset**: Hold down left mouse button and plug in.
     28 * **Bootloader entry**: Hold the underneath button while plugging in.