qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1089B)

      1 # Soulstone
      2 
      3 ![Soulstone](https://i.imgur.com/aQBsgZ9h.jpg)
      4 
      5 A hotswap PCB inspired by an elegant [prime_e](https://www.primekb.com/products/prime_e-rev-2-pcb),
      6 45% ergo keyboard. It is compatible with `rev2` (RGB and non-RGB) which makes it
      7 fit to any `rev2` compatible case.
      8 
      9 * Keyboard Maintainer: [Strech](https://github.com/Strech)
     10 * Hardware Supported: Soulstone
     11 * Hardware Availability: Coming soon
     12 
     13 Make example for this keyboard (after setting up your build environment):
     14 
     15     make strech/soulstone:default
     16 
     17 Flashing example for this keyboard:
     18 
     19     make strech/soulstone:default:flash
     20 
     21 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and
     22 the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
     23 Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     24 
     25 ## Bootloader
     26 
     27 Enter the bootloader using one of the following methods:
     28 
     29 * Tap the Reset switch mounted on the PCB
     30 * Hold down the key at (0,0) in the matrix (usually the top left key or `Escape`) and plug in the keyboard