qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1001B)

      1 # Bourgeau
      2 
      3 Compact 75% universal hotswap PCB with USB-C that supports a fixed 6.25U bottom row layout.
      4 
      5 * Keyboard Maintainer: [Studio Kestra](https://github.com/studiokestra/)
      6 * Hardware Supported: PLA75
      7 * Hardware Availability: [RNDKBD.com](https://rndkbd.com/)
      8 
      9 ## Bootload Sequence
     10 
     11 There are 3 ways to put the board in bootloader mode:
     12 
     13 - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR
     14 - While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR
     15 - With the default layout, toggle Layer 1 and press the `ESC` key.
     16 
     17 ## Compiling Firmware
     18 
     19 Make example for this keyboard (after setting up your build environment):
     20 
     21     make studiokestra/bourgeau:default
     22 
     23 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).