qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1074B)

      1 # Nascent
      2 
      3 65% PCB with leaf-spring mounting tabs designed for the Nascent keyboard.
      4 
      5 * Keyboard Maintainer: [Studio Kestra](https://github.com/studiokestra/)
      6 * Hardware Supported: [store.studiokestra.ca](https://store.studiokestra.ca/)
      7 * Hardware Availability: Group-Buy (Q1 2022)
      8 
      9 Make example for this keyboard (after setting up your build environment):
     10 
     11     make studiokestra/nascent:default
     12 
     13 Flashing example for this keyboard:
     14 
     15     make studiokestra/nascent:default:flash
     16 
     17 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     18 
     19 ## Bootload Sequence
     20 
     21 There are 3 ways to put the board in bootloader mode:
     22 
     23 - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR
     24 - While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR
     25 - With the default layout, toggle Layer 1 and press the `R` key.